01In CAD
I modeled the trailer in SolidWorks: the shell, roof, windows and running gear.
02As found
The trailer as it arrived, parked on the pad that would later sit under the pavilion.
Inside, the original 1960 layout was intact: a galley with a double sink and stove up front, a built-in dresser and wardrobe in the middle, and a bathroom across the rear.
The bathroom still had its original pink tub and the foot-pedal toilet on a tiled platform.
03Teardown
Everything came out — cabinets, cushions, fixtures and all — leaving an empty aluminum shell to work from.
Out goes the original foot-pedal toilet.
04Frame & subfloor
05Interior skins
With the trailer emptied, I cleaned and painted the interior aluminum skins white, which makes the curved shell feel much bigger and brighter.
06Floor
Then a new hardwood floor went down. I painted the subfloor white, then laid the strips one row at a time down the length of the trailer with a pneumatic flooring nailer, working out from the center toward the curved walls.
Finished, the floor runs the full length of the trailer and is scribed to the curve at each end. The wheel-well covers were painted to match the walls.












